Customization: | Available |
---|---|
After-sales Service: | Dedicated After-Sales Service Department |
Warranty: | 12 Months |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Engine Make | Perkins | ||
Engine Model: | 403D-11G | ||
Alternator Make | FG Wilson | ||
Alternator Model: | FGL10030 | ||
Control Panel: | FG100 | ||
Base Frame: | Heavy Duty Fabricated Steel | ||
Circuit Breaker Type: | 3 Pole MCB | ||
Frequency: | 50 HZ | 60 HZ | |
Engine Speed: RPM | rpm | 1500 | 1800 |
Fuel Tank Capacity: | litres (USgal) | ||
Fuel Consumption Prime | litres (USgal)/hr | 2.5 (0.7) | 2.9 (0.8) |
Fuel Consumption Standby | litres (USgal)/hr | 2.8 (0.7) | 3.3 (0.9) |
Engine Technical Data | ||
No. of Cylinders Alignment Cycle Bore Stroke Induction Cooling Method Governing Type Governing Class Compression Ratio Displacement Moment of Inertia: Voltage Ground Battery Charger Amps Engine Weight Dry Engine Weight Wet |
mm (in) mm (in) L (cu. in) kg m² (lb/in²) kg (lb) kg (lb) |
3 IN LINE 4 STROKE 77 (3) 81 (3.2) NATURALLY ASPIRATED WATER MECHANICAL ISO 8528 23:1 1.1 (69) 1.63 (5570) 12 Negative 40 129 (284) 139 (306) |
Engine Performance Data | 50 Hz | 60 Hz | |
Engine Speed | rpm | 1500 | 1800 |
Gross Engine Power Prime | kW (hp) | 8.6 (12) | 10.7 (14) |
Gross Engine Power Standby | kW (hp) | 9.5 (13) | 11.8 (16) |
BMEP Prime | kPa (psi) | 610 (88.5) | 630 (91.4) |
BMEP Standby | kPa (psi) | 672 (97.4) | 695 (100.8) |
Fuel Filter Type: | Replaceable Element | ||||
Recommended Fuel: | Class A2 Diesel | ||||
Fuel Consumption at | 110 % Load | 100 % Load | 75 % Load | 50 % Load | |
50 Hz Prime: | l/hr (USgal/hr) | 2.8 (0.7) | 2.5 (0.7) | 1.9 (0.5) | 1.5 (0.4) |
50 Hz Standby | l/hr (USgal/hr) | - | 2.8 (0.7) | 2.1 (0.6) | 1.6 (0.4) |
60 Hz Prime | l/hr (USgal/hr) | 3.3 (0.9) | 2.9 (0.8) | 2.2 (0.6) | 1.8 (0.5) |
60 Hz Standby | l/hr (USgal/hr) | - | 3.3 (0.9) | 2.4 (0.6) | 1.8 (0.5) |
Air System | 50 Hz | 60 Hz | |
Air Filter Type: | Replaceable Element | ||
Combustion Air Flow Prime Combustion Air Flow Standby Max. Combustion Air Intake Restriction |
m³/min (cfm) m³/min (cfm) kPa |
0.7 (25) 0.7 (25) 6.4 (25.7) |
0.9 (32) 0.9 (32) 6.4 (25.7) |
Air System | 50 Hz | 60 Hz | |
Air Filter Type: | Replaceable Element | ||
Combustion Air Flow Prime Combustion Air Flow Standby Max. Combustion Air Intake Restriction |
m³/min (cfm) m³/min (cfm) kPa |
0.7 (25) 0.7 (25) 6.4 (25.7) |
0.9 (32) 0.9 (32) 6.4 (25.7) |
Lubrication System | ||
Oil Filter Type: | Spin-On, Full Flow | |
Total Oil Capacity: Oil Pan Capacity: Oil Type: |
l (USgal) l (USgal) |
4.9 (1.3) 4.4 (1.2) API CH4 15W-40 |
Oil Cooling Method: | N/A |
Exhaust System | 50 Hz | 60 Hz | |
Maximum Allowable Back Pressure: | kPa (inHg) | 10.2 (3) | 10.2 (3) |
Exhaust Gas Flow: Prime | m³/min (cfm) | 1.7 (59) | 2.2 (78) |
Exhaust Gas Flow: Standby | m³/min (cfm) | 1.8 (64) | 2.4 (85) |
Exhaust Gas Temperature: Prime | °C (°F) | 368 (694) | 437 (819) |
Exhaust Gas Temperature: Standby | °C (°F) | 420 (788) | 515 (959) |
Alternator Physical Data | ||
No. of Bearings: | 1 | |
Insulation Class: Winding Pitch: Winding Code Wires: Ingress Protection Rating: Excitation System: AVR Model: |
H 2/3 M 3 IP23 SHUNT R121 |
|
* dependant on voltage code selected | ||
Alternator Operating Data | ||
Overspeed: rpm | 2250 | |
Voltage Regulation: (Steady state) Wave Form NEMA = TIF: Wave Form IEC = THF: Total Harmonic content LL/LN: Radio Interference: Radiant Heat: 50 Hz Radiant Heat: 60 Hz |
% % % kW (Btu/min) kW (Btu/min) |
+/- 1.0 100 2 3.5 EN61000-6 1.4 (80) 1.6 (91) |
Alternator Performance Data 50 Hz: | |||||
Voltage Code |
240 V | 230 V | 220 V | ||
Motor Starting Capability* Short Circuit Capacity** Reactances |
kVA % Xd X'd X"d |
18 0 1.15 0.21 0.116 |
17 0 1.25 0.23 0.116 |
16 0 1.36 0.25 0.126 |
0 |
Voltage Code |
220/110 V |
240/120 V |
||||
Motor Starting Capability* Short Circuit Capacity** Reactances |
kVA % Xd X'd X"d |
0 |
14 0 1.92 0.36 0.179 |
16 0 1.62 0.3 0.15 |
0 0 0 0 0 |
0 |
Output Ratings 50 Hz | ||||
Voltage Code 415/240V 400/230V 380/220V 230/115V 220/127V 220/110V 200/115V |
kVA |
Prime kW |
kVA |
Standby kW |
240V | 6.8 | 6.8 | 7.5 | 7.5 |
230V | 6.8 | 6.8 | 7.5 | 7.5 |
220V | 6.8 | 6.8 | 7.5 | 7.5 |
Output Ratings 60 Hz | ||||||
Voltage Code 480/277V 440/254V 416/240V 400/230V 380/220V |
Prime kVA |
Standby kW kVA |
kW |
|||
240/139V 240/120V 230/115V 220/127V 220/110V 208/120V |
||||||
240/120 | 8 | 8 | 8.8 | 8.8 | ||
220/110 | 8 | 8 | 8.8 | 8.8 |